552R

“HP 552 R” is a high melt flow homopolymer for the production of CF, BCF, and fine denier staple fibers at medium to high spinning speeds and exhibits excellent antigasafading properties.

“HP 552R” is suitable for nonwoven fabrics for diapers, medical-sanitary applications, and wipes. Another typical application is high tenacity continuous filament for straps for backpacks. sports bags, bulk bags, and safety belts. Continuous filament with medium tenacity is used for straps for

Upholstery and sportswear. “HP552R” is also suited for the production of bulked continuous filament for carpets.

“HP 552R” is suitable for food contact.

Processing Method

Fiber Extrusion(CF,BCF,stapble)

Feature

High melt flow

Excellent antigasfading properties

Good processability

Homopolymer

Typical Applications

Nonwoven fabrics for diapers, medical-sanitary applications Wipes and tissues.

Straps for backpacks, sport bags, bulk bags and for safety belts Upholstery and sportswear.

Bulk continuous filament for carpets

Nonwoven staple fiber

Hygiene nonwoven

Approval

Food

more info

Low Density Polyethylene LF0200

General information

LF0200 is a high molecular weight low density polyethylene film grade combing good flexible extrusion behavior and superior mechanical properties. Film made from LF0200 exhibits impact combined with excellent yield and tensile strength and high stiffness.

Application

LF0200 is well suited for wide range of application due to its unique balance of properties. The superior mechanical properties will improve the function ability of the films.

LF0200

 Processing Conditions

LF0200 can be easily processed in all type of extruders. The temperature of the polymer at the die output should be in the range of 160-180 c°. Minimum blow up ratio should be about 2 in order to keep a good balance of mechanical properties

 Storage

The product should be stored in dry conditions at temperature below 60c° and protected from UV light. Improper storage can initiate degradation with resulting odour generation and color changes.

 Health & Environment

LF0200 is not classified as a dangerous product. Dust and fines from the product may give a risk for dust explosion. All equipment should be probably grounded. Inhalation of dust may irritate the respiratory system and should be avoided.During processing of the product small amount of fumes is generated, which require proper ventilation.

 Recycling

The product is suitable for recycling using modern methods of shredding and cleaning for other applications only if approved in the revenant standard or specification. In-house production waste should be kept clean to facilitate direct recycling.

 Packaging

This product is packed in 25 Kg PE bags.

more info

LFI2119

DESCRIPTION

LFI2119 is a low density polyethylene, with excellent optical properties. This grade offers a high output and excellent draw down and specially designed for general purpose thin films.

APPLICATIONS

LFI2119 is recommended for blown film extrusion. This product is suitable for manufacture of general purpose LDPE film packaging and general lamination films

LFI2119

Notes:

(1) Typical Values: not to be construed as specifications limits.

(2) Properties are based on 25 μm blown film produced at a melt temperature of 170°C and 3 BUR using 100% LFI2119.

General Information

LFI2119 has been manufactured using SABTEC licensed technology.

Processing Conditions

Extruder temperature profile: 160-185°C

Frost line height: 5-7 times die diameter

Blow Up Ratio: 2-3

Recommended film thickness: 20 to 50 μm

Please note that, these processing conditions are recommended by producer only for 100% LFI2119 resin (not in the case of blending with any other compatible material), but because of the many particular factors which are outside our knowledge and control, and may affect the use of product, no warranty is given.

Packaging

Supplied in pellet form and can be packaged in 25kg Bags, one ton semi bulk or 17 tons bulk containers.

Food Packaging

The above mentioned grade meets the relevant requirements of plastics directive 2002/72/EC (06-08-2002) and its amendments till directive 2008/39EC relating to plastic materials and articles intended to come into contact with foodstuffs.

Pharmaceutical Application

The above mentioned grade meets the requirements of the European pharmacopeia version 6 sections 3.1.5 for pharmaceutical application.

Conveying

Conveying equipment should be designed to prevent accumulation of fines and dust particles can, under certain conditions, pose an explosion hazard. We recommend that the conveying system used:

  1. Be equipped with adequate filters.
  2. Is operated and maintained in such a manner to ensure no leaks develop.
  3. That adequate grounding exists at all times.

We further recommend that good housekeeping will practiced throughout the facility.

Storage

All resins should be protected from direct sunlight and/or heat during storage. The storage location should also be dry, dust free and the ambient temperature should not exceed 50°C. It is also advisable to process polyethylene resins (in pelletized or powder from) within 6 months after delivery, this because also excessive aging of polyethylene can lead to a deterioration in quality. ASPC would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is also advisable to process

Polyethylene resins (in pelletized or powder form) within 6 months after delivery, this because also excessive aging of polyethylene can lead to a deterioration in quality

Handling

Minimal protection to prevent possible mechanical or thermal injury to the eyes. Fabrication areas should be ventilated to carry away fumes or vapors.

Combustibility

Polyethylene resins will burn when supplied adequate heat and oxygen. They should be handled and stored away from contact with direct flames and/or other ignition sources .in burning; polyethylene resins contribute high heat and may generate a dense black smoke. Fires can be extinguished by conventional means with water and mist preferred. In enclosed areas, fire fighters should be provided with self-contained breathing apparatus.

Note: this information is based on our current knowledge and experience .in view of many factors that may affect processing and application, this data does not relive processors from the responsibility of carrying out their own tests and experiments, neither does it imply any legally binding assurance of certain properties or of suitability for a specific purpose. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and existing laws and legislation are observed.

more info

LDPE 2102TN00

 Low Density Poly Ethylene

LDPE 2102TN00

General Information

DSM produces low density polyethylene by the tubular and the autoclave reactor processes. As a result the product range covers a wide variety of densities and melt flow rates. Further it includes a large number of grades with excellent optical properties which yield firm with a high to very high clarity.

Finally there is a wide variety of additives. For example, several grades contain the slip agent erucamide. Films produced from these materials have excellent surface properties and very low odour and taste levels, which is of advantage in e.g. food packaging.

more info

LDPE 2100

 Low Density Poly Ethylene for Blown Film

Application

Grade with excellent toughness and tear strength and outstanding shrink properties.very low energy consumption during processing and has excellent draw down ability.The material contains no additives and is suitable for application in shrinkhoods,industrial sacks,heavy duty carrier bags and liners.

LDPE 2100

General information

LPC produces low density polyethylene by the tubular reactor process.As a result the product range covers a wide variety of densities and melt flow rates.The LDPE grade slate has a widw variety of slip and anti block additives levels and includes a large numbers of grades with excellent optical properties.

LPC tubular production technology guarantees a very low gel level and outstanding draw down ability,low odour and taste levels,ahich is of advantage for thin film processing and e.g. food packaging.

Quality

LPC is fully certified in accordance with the internationally accepted quality standard ISO 9001-2000.It is LPC policy to supply materials that meet customers specifications and needs and to keep up its reputation as a pre-eminent,reliable supplier of e.g. polyethylenes.

Enviroment

The environmental aspects of any packaging material do not only imply waste issues but have to be considered in relation with the use of natural resources,the preservations of foodstuffs,etc.LPC considers polyethylene to be an environmentally efficient

packaging material.Its low specific energy consumption and insignificant emissions to air and water designate polyethylene as the ecological alternative in comparison with the traditional packaging materials.

Recycling

Recycling of packaging materials is supported by LPC whenever ecological and social benefits are achieved and where a social infrastructure for selective collecting and sorting of packaging is fostered.Whenever ‘thermal’ recycling of packagings (i.e.incineration with energy recovery)is carried out,polyethylene –with its fairly simple molecular structure and low amount of additives-is considered to be a trouble-free fuel.

Food approvals

The converter/food packager is responsible for compliance of the performance of the final article under foreseeable conditions of use.More specific information on the regulatory aspects of the LPC polyethylene is available in the relevant Food Approval Declarations which can be obtained from LPC Sales Office.

Safety

Under normal conditions polyethylenes do not present a toxic hazard through skin contact or inhalation.During processing contact with molten polymer and inhalation of volatilized fumes should be avoided.It is recommended to install exhaust hoods over processing machines and to keep working area well ventilated.More specific information on the safety aspects of the LPC polyethylenes is provided in the relevant Material Safety Data Sheets,available from LPC Sales Office.

Storage

As polyethylenes ,like most polymers,are combustible ,the usual precautions concerning ignition sources should be taken in warehouses and storage rooms.where larg quantities are kept in store,it is necessary to observe the normal rules for orderly stock control and to keep out dust and moisture.Polyethylenes should be stored in such a way as to prevent exposure to direct sunlight,as this may lead to quality deterioration.

Disclaimer

The information contained herein may include typical properties of our products or their typical performances when used in certain typical applications.Actual properties of our products,in particular when used in conjunction with any third party material(s) or for any non-typical applications,may differ from typical properties.It is the customer’s responsibility to inspect and test our product(s) in order to satisfy itself as to the suitability of the product(s) for its and its customers particular purposes.The customer is responsible for the appropriate ,safe and legal use,processing and handling of all product(s) purchased from us.Nothing herein is intended to be nor shall it constitute a warranty whatsoever,in particular,warranty of merchantability or fitness for a particular purpose.

more info

LDPE Lupolen 2420 H

Product Description

Lupolen 2420 H is a non –additivated  ,low density Polyethylene .It is delivered in pellet form.

Applications

  • Bags & Pouches
  • Film
  • Shrink Film
  • Blown Film

Processing Method

  • Cast Film
  • Blown Film

Features

Good Heat Seal, Optical, Good Process ability

Lupolen 2420 H

more info

LDPE Lupolen 2420 D

Product Description

Lupolen 2420 D is a non –additivated, low density Polyethylene .It is delivered in pellet form.

Applications

  • Bags & Pouches
  • Bottles for Consumer Goods
  • Shrink Film
  • Blown Film
  • Film

Processing Method

  • Blown Film Injection
  • Moulding Extrusion Blow
  • Moulding

Features

Good Heat Seal, Optical, Good Process ability, Good Melt Strength

LDPE Lupolen 2420 D

more info

LDPE 2102TX

Low Density Poly Ethylene for Blown Film

Application

For general purpose film without additives.used in a wide range of widths and thicknesses for pouches,bags,liners and lamination film.

General information

LPC produces low density polyethylene by the tubular reactor process.As a result the product range covers a wide variety of densities and melt flow rates.The LDPE grade slate has a widw variety of slip and anti block additives levels and includes a large numbers of grades with excellent optical properties.

LPC tubular production technology guarantees a very low gel level and outstanding draw down ability,low odour and taste levels,ahich is of advantage for thin film processing and e.g. food packaging.

Quality

LPC is fully certified in accordance with the internationally accepted quality standard ISO 9001-2000.It is LPC policy to supply materials that meet customers specifications and needs and to keep up its reputation as a pre-eminent,reliable supplier of e.g. polyethylenes.

Enviroment

The environmental aspects of any packaging material do not only imply waste issues but have to be considered in relation with the use of natural resources,the preservations of foodstuffs,etc.LPC considers polyethylene to be an environmentally efficient

The environmental aspects of any packaging material do not only imply waste issues but have to be considered in relation with the use of natural resources,the preservations of foodstuffs,etc.LPC considers polyethylene to be an environmentally efficient packaging material.Its low specific energy consumption and insignificant emissions to air and water designate polyethylene as the ecological alternative in comparison with the traditional packaging materials.

Recycling

Recycling of packaging materials is supported by LPC whenever ecological and social benefits are achieved and where a social infrastructure for selective collecting and sorting of packaging is fostered.Whenever ‘thermal’ recycling of packagings (i.e.incineration with energy recovery)is carried out,polyethylene –with its fairly simple molecular structure and low amount of additives-is considered to be a trouble-free fuel

Food approvals

The converter/food packager is responsible for compliance of the performance of the final article under foreseeable conditions of use.More specific information on the regulatory aspects of the LPC polyethylene is available in the relevant Food Approval Declarations which can be obtained from LPC Sales Office.

Safety

Under normal conditions polyethylenes do not present a toxic hazard through skin contact or inhalation.During processing contact with molten polymer and inhalation of volatilized fumes should be avoided.It is recommended to install exhaust hoods over processing machines and to keep working area well ventilated.More specific information on the safety aspects of the LPC polyethylenes is provided in the relevant Material Safety Data Sheets,available from LPC Sales Office.

Storage

As polyethylenes ,like most polymers,are combustible ,the usual precautions concerning ignition sources should be taken in warehouses and storage rooms.where larg quantities are kept in store,it is necessary to observe the normal rules for orderly stock control and to keep out dust and moisture.Polyethylenes should be stored in such a way as to prevent exposure to direct sunlight,as this may lead to quality deterioration.

Disclaimer

The information contained herein may include typical properties of our products or their typical performances when used in certain typical applications.Actual properties of our products,in particular when used in conjunction with any third party material(s) or for any non-typical applications,may differ from typical properties.It is the customer’s responsibility to inspect and test our product(s) in order to satisfy itself as to the suitability of the product(s) for its and its customers particular purposes.The customer is responsible for the appropriate ,safe and legal use,processing and handling of all product(s) purchased from us.Nothing herein is intended to be nor shall it constitute a warranty whatsoever,in particular,warranty of merchantability or fitness for a particular purpose.

more info

LDPE 0075

General Information

 LH0075 is a high molecular weight low density polyethylene film grade combining good flexible extrusion behavior and superior mechanical properties. Film made from LH0075 exhibits high dart impact combined with excellent yield and tensile strength and high stiffness.

Application

LH0075 is well suited for wide range of applications due to its unique balance of properties. The superior mechanical properties will improve the function ability of the film.

LDPE 0075

Processing Conditions

 LH0075 can be easily processed in all types of extruders. The temperature of the polymer at the die output should be in the range of 180-210 C°.

Storage

The product should be stored in dry conditions at temperature below 60 oC and protected from UV light. Improper storage can initiate degradation that causes odor generation and color changes.

Health & Environment

LH0075 is not classified as a dangerous product. Dust and fines from the product may give a risk for dust explosion. All equipment should be properly grounded. Inhalation of dust may irritate the respiratory system and should be avoided. During processing of the product small amounts of fumes are generated, which require proper ventilation.

Recycling

The product is recyclable using modern methods of shredding and cleaning. It can be used for other applications only if it is approved by the relevant standard or specification. In-house production waste should be kept clean to facilitate direct recycling.

Packaging

 This product is packed in 25 Kg PE bags

more info

EX 5-HM 9450 F

Product Description

“EX 5” is a high density polyethylene with 1-Butene as co monomer. It is good toughness, low gel level, good toor strenght, good stiffness and tenacity, High molar mass.

Applications

  • Film extrusion
  • Counter bag, carrier bag
  • Wrapping films & sheets

  • Typical Values: not to be construed as specifications 
  • Blow film thickness 20 µm , Extruded at melt temp. of 200 c and Blow up Ratio 4:1
  • Recommended melt temperature: 200_230 ºc
  • Recommended film thickness: 10~200 µm
more info
  • 1
  • 2