HDPE پلی اتیلن سنگین

EX 5-HM 9450 F

Product Description “EX 5” is a high density polyethylene with 1-Butene as co monomer. It is good toughness, low gel level, good toor strenght, good stiffness and tenacity, High molar mass. Applications Film extrusion Counter bag, carrier bag Wrapping films & sheets Typical Values: not to be construed as specifications 

CRP 100

Top quality PE100 pressure pipes for gas and water transportation at higher pressures or with thinner walls as PE80 Applications Top quality PE100 pressure pipes Additives Antioxidant/Process stabilizer Lubricant (processing aid)/acid scavenger COLOR AGENT Material properties  This data are typical values and are not to be construed as product specifications

HDPE EX3

Product Description EX3is a natural colored high density polyethylene with Butene-1 as comonomer.The product is classified as PE 100 and shows good stress crack resistance properties (ESCR) combined with good impact strength. Stabilization :Ca-Stearate, Zn – Stearate, Irganox1010,Irgafos 168 Applications Pipe Extrusion PE100 Class Pressure pipe. Drinking water and gas

HD-52518

HDPE made via Spherilene Process HD-52518 is a HDPE copolymer which manufactured by gas phase process. This grade is LLDPE Injection Moulding, Extrusion Coating & Rotomoulding. Injection molding for application requiring a good balance between easy of processability and flowability and mechanical properties are the special perpuse of this grade.

7000F FILM GRADE

PRODUCT DESCRIPTION 7000 F is a high density polyethylene resin ;a product of bi-modal process from Mitsui Chemicals, Inc. of Japan TYPICAL APPLICATION Recommend film thickness at 10-25 micron Shopping bag and T-shirt bag High tensile strength with good dart impact strength   Garbage bag   Low gel content  

HFI5110

HFI5110 PRODUCT DESCRIPTION HFI5110 is a high molecular weight, high density polyethylene, which has a broad molecular weight distribution and high melt strength. This product specially designed for producing thin films with excellent strength and rigidity. APPLICATIONS HFI5110 is recommended for blown film extrusion. This product is suitable for manufacture

HDPE 5000S

DPE 5000S *Above are not the spec of products, but only for reference

HD3840

HD3840 HD3840UA is high density polyethylene copolymer containing butene-1(C4) as comonomer. It is suitable for use as rotational moulding applications. HD3840UA has the following characteristics good impact strength,easy to demould,uv stabilised,good whiteness,excellent surface finish. This grade has food contact approval. Applications  general purpose rotomolded items,septic tanks,recycling banks *All above mentioned

copyright (c) 2021 Al-amir company

website design and optimize seven24co

copyright © 2017, All Right Reserved

No 207,Al Duarra Bulding,P.O.Box:450221

Al Garhoud ,Dubai-U.A.E